Xantrex C12 Charge Controller

Bookmark and Share

XANTREX 
C12 CHARGE CONTROLLER
12 AMPS

The C12's field configurability and feature packed design makes it the only small PV controller you need!

C12 Charge ControllerPhotovoltaic Charge Controller


DC Load Controller

 

Automatic Lighting Controller

 

Applications:

Size:

    • Silent, solid state, series pulse width modulated (PWM) charge control with 3-stage (bulk, absorb, & float).
    • Field adjustable setpoints with removable knobs to reduce tampering (bulk range: 13.0 to 17.0 VDC).
    • Electronic short circuit, overload, overtemperature and reverse polarity protection improves reliability.
    • Automatic reset of overload protection system--eliminates problems of tripped breakers and blown fuses.
    • High efficiency, "No diode" design without electronics in the negative conductors (as per NEC code).
    • Optional plug-in/replaceable temperature compensation sensor --ideal for sealed batteries.
    • Continous rating of 12 amps @ 113°F /45°C and 8 amps @ 150°F/65°C for severe environments.
    • Designed for 15 amps of short-circuit PV array current (typically about four 50 watt modules).
    • Two stage lightning and surge suppression through both active and passive protection components.
    • Equalize mode (@ bulk+1DC for 2 hours) with automatic activation every 30 days or if LVD is reached (defeatable).
     
    • Automatic low voltage disconnect (LVD) with adjustable setpoint (LVD range 10.5 to 12.5 VDC).
    • Automatic low voltage reconnect (LVR) with adjustable setpoint (LVR range 12.0 to 14.0 VDC)
    • Selectable automatic or manuals reconnection of loads after low voltage disconnect accurs.
    • Electronic short-circuit, overload, overtemperature and reverse polarity protection improves reliability.
    • Continous rating of 12 amps @ 113°F /45°C and 8 amps @ 150°F/65°C for severe environments.
    • Low voltage disconnect warning system--blinks loads on-off-on when the battery voltage is below the low voltage disconnect setting after a two minute delay. Loads are then disconnected after a 5 minute additional time delay unless loads have been reduced and voltage has risen above the low voltage disconnect setpoint.
    • Manual reset switch on bottom of enclosure allows one-time 10 minute grace period for operation of DC loads after reset has accurred. Additional pushes have no effect until voltage reaches the low voltage reconnect setting.
    • Automatic control of lighting systems with nighttime detection by using the PV array as a photocell.
    • Adjustable run duration from 2 to 8 hours or "dusk to dawn" all night operation of lights, unless LVD is reached.
    • Electronic short-circuit, overload, overtemperature and reverse polarity protection improves reliability.
    • Continous rating of 12 amps @ 113°F /45°C and 8 amps @ 150°F/65°C for severe environments.
    • Manual reset switch on bottom of enclosure allows testing of lights during daytime or after LVD has accured.
    • Village Power
    • Cabin/Vacation Homes
    • Outdoor Area Lighting
    • Sign Lighting
    • Bus Shelters
    • Telecommunication.
    • 605" H x 4.3" W x 1.5" D
    • 16.5 cm x 11 cm x 4 cm

0 Comments Add your own

This product hasn't received any reviews yet. Be the first to review this product!
Sign in to post a comment.
Don't have a VirtualMall Jamaica account? Click here to signup.
Please fill in the following form to signin.